Microfluidic Fabricated Liposomes for Nutlin-3a Ocular Delivery as Potential Candidate for Proliferative Vitreoretinal Diseases Treatment.

Purpose: Proliferative vitreoretinal diseases (PVDs) represent a heterogeneous group of pathologies characterized by the presence of retinal proliferative membranes, in whose development retinal pigment epithelium (RPE) is deeply involved. As the only effective treatment for PVDs at present is surgery, we aimed to investigate the potential therapeutic activity of Nutlin-3a, a small non-genotoxic inhibitor of the MDM2/p53 interaction, on ARPE-19 cell line and on human RPE primary cells, as in vitro models of RPE and, more importantly, to formulate and evaluate Nutlin-3a loaded liposomes designed for ophthalmic administration. Methods: Liposomes were produced using an innovative approach by a microfluidic device under selection of different conditions. Liposome size distribution was evaluated by photon correlation spectroscopy and centrifugal field flow fractionation, while the liposome structure was studied by transmission electron microscopy and Fourier-transform infrared spectroscopy. The Nutlin-3a entrapment capacity was evaluated by ultrafiltration and HPLC. Nutlin-3a biological effectiveness as a solution or loaded in liposomes was evaluated by viability, proliferation, apoptosis and migration assays and by morphological analysis. Results: The microfluidic formulative study enabled the selection of liposomes composed of phosphatidylcholine (PC) 5.4 or 8.2 mg/mL and 10% ethanol, characterized by roundish vesicular structures with 150-250 nm mean diameters. Particularly, liposomes based on the lower PC concentration were characterized by higher stability. Nutlin-3a was effectively encapsulated in liposomes and was able to induce a significant reduction of viability and migration in RPE cell models. Conclusion: Our results lay the basis for a possible use of liposomes for the ocular delivery of Nutlin-3a.

Nutlin-3 Loaded Ethosomes and Transethosomes to Prevent UV-Associated Skin Damage.

The skin's protective mechanisms, in some cases, are not able to counteract the destructive effects induced by UV radiations, resulting in dermatological diseases, as well as skin aging. Nutlin-3, a potent drug with antiproliferative activity in keratinocytes, can block UV-induced apoptosis by activation of p53. In the present investigation, ethosomes and transethosomes were designed as delivery systems for nutlin-3, with the aim to protect the skin against UV damage. Vesicle size distribution was evaluated by photon correlation spectroscopy and morphology was investigated by cryogenic transmission electron microscopy, while nutlin-3 entrapment capacity was evaluated by ultrafiltration and HPLC. The in vitro diffusion kinetic of nutlin-3 from ethosomes and transethosomes was studied by Franz cell. Moreover, the efficiency of ethosomes and transethosomes in delivering nutlin-3 and its protective role were evaluated in ex vivo skin explants exposed to UV radiations. The results indicate that ethosomes and transethosomes efficaciously entrapped nutlin-3 (0.3% w/w). The ethosome vesicles were spherical and oligolamellar, with a 224 nm mean diameter, while in transethosome the presence of polysorbate 80 resulted in unilamellar vesicles with a 146 nm mean diameter. The fastest nutlin-3 kinetic was detected in the case of transethosomes, with permeability coefficients 7.4-fold higher, with respect to ethosomes and diffusion values 250-fold higher, with respect to the drug in solution. Ex vivo data suggest a better efficacy of transethosomes to promote nutlin-3 delivery within the skin, with respect to ethosomes. Indeed, nutlin-3 loaded transethosomes could prevent UV effect on cutaneous metalloproteinase activation and cell proliferative response.

Modulable Photocatalyzed Strategies for the Synthesis of α-C-Glycosyl Alanine Analogues via the Giese Reaction with Dehydroalanine Derivates.

Herein, we present the α-selective Giese reaction between pyranosyl/furanosyl bromides and dehydroalanine analogues, which provides access to a library of highly valuable α-C-glycosyl alanines. The key C-glycosyl radical is generated through photocatalysis by either the new generation copper(I) complex [(DPEPhos)(bcp)Cu]PF6 or [Ru(bpy)3](BF4)2. The reactions proceed smoothly, affording the desired α-C-glycosyl alanines in up to 99% yield when diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate [Hantzsch ester (HE)] is used as an additive. N,N-Diisopropylethylamine (DIPEA) has been selected as a reductant in both protocols. A mechanistic study by means of transient absorption spectroscopy unveils a halogen-atom transfer (XAT) process in C-glycosyl radical formation.

Oxidative NHC Catalysis: An Unconventional Tool for Macrocyclic Oligoesters Synthesis.

The application of N-heterocyclic carbene (NHC) catalysis under highly diluted oxidative condition to the polycondensation of dialdehydes and diols is herein presented as an alternative, atom-economical synthetic route to macrocyclic oligoesters (MCOs). The disclosed protocol paves the way to the straightforward access to MCOs, starting from commercial dialdehydes, avoiding the use of toxic diacyl chlorides, commonly employed in traditional MCOs synthetic processes. The method is totally metal-free, takes place in the green Me-THF solvent and requires the use of a fully recyclable quinone oxidant. The protocol versatility is confirmed by the employment of fossil-based and bio-based monomers such as 2,5-diformylfuran (DFF), 2,5-bis(hydroxymethyl)furan (BHMF), and isomannide, synthesizing a series of novel and known synthetically relevant macrocyclic oligoesters, fully characterized by NMR and MALDI-TOF MS analysis, with product yields (51-86 %) comparable to those obtained by traditional synthetic routes. Finally, to emphasize the synthetic relevance of the target macrocycles, an entropically-driven ring opening polymerization (ED-ROP) key study has been performed, optimizing the organocatalyzed synthesis of poly(2,5-furan-dimethylene 2,5 furandicarboxylate) (PBHMF) with number-average molecular weight up to 8200 g mol-1 and 66 % isolated yield.

Efficiency in Carbon Dioxide Fixation into Cyclic Carbonates: Operating Bifunctional Polyhydroxylated Pyridinium Organocatalysts in Segmented Flow Conditions.

Novel polyhydroxylated ammonium, imidazolium, and pyridinium salt organocatalysts were prepared through N-alkylation sequences using glycidol as the key precursor. The most active pyridinium iodide catalyst effectively promoted the carbonation of a set of terminal epoxides (80 to >95% yields) at a low catalyst loading (5 mol%), ambient pressure of CO2, and moderate temperature (75 °C) in batch operations, also demonstrating high recyclability and simple downstream separation from the reaction mixture. Moving from batch to segmented flow conditions with the operation of thermostated (75 °C) and pressurized (8.5 atm) home-made reactors significantly reduced the process time (from hours to seconds), increasing the process productivity up to 20.1 mmol(product) h-1 mmol(cat)-1, a value ~17 times higher than that in batch mode.

Oxidative N-Heterocyclic Carbene Catalysis.

N-Heterocyclic carbene (NHC) catalysis is a by now consolidated organocatalytic platform for a number of synthetic (asymmetric) transformations via diverse reaction modes/intermediates. In addition to the typical umpolung processes involving acyl anion/homoenolate equivalent species, implementation of protocols under oxidative conditions greatly expands the possibilities of this methodology. Oxidative NHC-catalysis allows for oxidative and oxygenative transformations through specific manipulations of Breslow-type species depending upon the oxidant used (external oxidant or O2 /air), the derived NHC-bound intermediates paving the way to non-umpolung processes through activation of carbon atoms and heteroatoms. This review is intended to update the state of the art in oxidative NHC-catalyzed reactions that appeared in the literature from 2014 to present, with a strong focus to crucial intermediates and their mechanistic implications.

Photoredox Cross-Dehydrogenative Coupling of N-Aryl Glycines Mediated by Mesoporous Graphitic Carbon Nitride: An Environmentally Friendly Approach to the Synthesis of Non-Proteinogenic α-Amino Acids (NPAAs) Decorated with Indoles.

Indole-decorated glycine derivatives are prepared through an environmentally benign cross-dehydrogenative coupling between N-aryl glycine analogues and indoles (yield of ≤81%). Merging heterogeneous organocatalysis and photocatalysis, C-H functionalization has been achieved by selective C-2 oxidation of N-aryl glycines to afford the electrophilic imine followed by Friedel-Crafts alkylation with indole. The sustainability of the process has been taken into account in the reaction design through the implementation of a metal-free recyclable heterogeneous photocatalyst and a green reaction medium. Scale-up of the benchmark reaction (gram scale, yield of 69%) and recycling experiments (over seven runs without a loss of efficiency) have been performed to prove the robustness of the protocol. Finally, mechanistic studies were conducted employing electron paramagnetic resonance spectroscopy to unveil the roles of the photocatalyst and oxygen in the formation of odd-electron species.

Rheological Response of Polylactic Acid Dispersions in Water with Xanthan Gum.

In this work, the rheological behavior of stable poly(lactic acid) (PLA) dispersions in water, intended for coating applications, was investigated. The newly prepared dispersion consists of PLA particles with an average diameter of 222 ± 2 nm based on dynamic light scattering (DLS) and scanning electron microscopy (SEM) analyses, at concentrations varying in the 5-22 wt % range. Xanthan gum (XG), a bacterial polysaccharide, was used as a thickening agent to modulate the viscosity of the formulations. The rheological properties of the PLA dispersions with different XG and PLA contents were studied in steady shear, amplitude sweep, and frequency sweep experiments. Under steady shear conditions, the viscosity of all the formulations showed a shear-thinning behavior similar to XG solutions in the whole investigated 1-1000 s-1 range, with values dependent on both PLA particles and XG concentrations. Amplitude and frequency sweep data revealed a weak-gel behavior except in the case of the most diluted sample, with moduli dependent on both PLA and XG contents. A unified scaling parameter was identified in the volume fraction (ϕ) of the PLA particles, calculated by considering the dependence of the continuous phase density on the XG concentration. Accordingly, a master curve at different volume fractions was built using the time-concentration-superposition approach. The master curve describes the rheological response of the system over a wider frequency window than the experimentally accessible one and reveals the presence of a superimposed ß relaxation process in the high-frequency region.

Phenyl-substituted aminomethylene-bisphosphonates inhibit human P5C reductase and show antiproliferative activity against proline-hyperproducing tumour cells.

In certain cancers, such as breast, prostate and some lung and skin cancers, the gene for the enzyme catalysing the second and last step in proline synthesis, δ1-pyrroline-5-carboxylate (P5C) reductase, has been found upregulated. This leads to a higher proline content that exacerbates the effects of the so-called proline-P5C cycle, with tumour cells effectively using this method to increase cell survival. If a method of reducing or inhibiting P5C reductase could be discovered, it would provide new means of treating cancer. To address this point, the effect of some phenyl-substituted derivatives of aminomethylene-bisphosphonic acid, previously found to interfere with the catalytic activity of plant and bacterial P5C reductases, was evaluated in vitro on the human isoform 1 (PYCR1), expressed in E. coli and affinity purified. The 3.5-dibromophenyl- and 3.5-dichlorophenyl-derivatives showed a remarkable effectiveness, with IC50 values lower than 1 µM and a mechanism of competitive type against both P5C and NADPH. The actual occurrence in vivo of enzyme inhibition was assessed on myelogenous erythroleukemic K562 and epithelial breast cancer MDA-MB-231 cell lines, whose growth was progressively impaired by concentrations of the dibromo derivative ranging from 10-6 to 10-4 M. Interestingly, growth inhibition was not relieved by the exogenous supply of proline, suggesting that the effect relies on the interference with the proline-P5C cycle, and not on proline starvation.

Exploring Oxidative NHC-Catalysis as Organocatalytic Polymerization Strategy towards Polyamide Oligomers.

The polycondensation of diamines and dialdehydes promoted by an N-heterocyclic carbene (NHC) catalyst in the presence of a quinone oxidant and hexafluoro-2-propanol (HFIP) is herein presented for the synthesis of oligomeric polyamides (PAs), which are obtained with a number-average molecular weight (Mn ) in the range of 1.7-3.6 kg mol-1 as determined by NMR analysis. In particular, the utilization of furanic dialdehyde monomers (2,5-diformylfuran, DFF; 5,5'-[oxybis(methylene)]bis[2-furaldehyde], OBFA) to access known and previously unreported biobased PAs is illustrated. The synthesis of higher molecular weight PAs (poly(decamethylene terephthalamide, PA10T, Mn = 62.8 kg mol-1 ; poly(decamethylene 2,5-furandicarboxylamide, PA10F, Mn = 6.5 kg mol-1 ) by a two-step polycondensation approach is also described. The thermal properties (TGA and DSC analyses) of the synthesized PAs are reported.

Oxidative Coupling of Aldehydes with Alcohol for the Synthesis of Esters Promoted by Polystyrene-Supported N-Heterocyclic Carbene: Unraveling the Solvent Effect on the Catalyst Behavior Using NMR Relaxation.

Heterogeneous organocatalysts hold great potential as they offer practical advantages in terms of purification and reusability compared with the homogeneous counterpart. A puzzling aspect is the solvent effect on their catalytic performance. Here we propose a new approach whereby T1/T2 NMR relaxation measurements are used to evaluate the strength of solvent-surface interactions in the polystyrene-supported N-heterocyclic carbene-promoted oxidation of aldehydes. The results reveal that solvents with high surface affinity lead to a decrease in catalyst activity.

A Visible-Light-Powered Polymerization Method for the Immobilization of Enantioselective Organocatalysts into Microreactors.

A versatile one-step photopolymerization approach for the immobilization of enantioselective organocatalysts is presented. Chiral organocatalyst-containing monoliths based on polystyrene divinylbenzene copolymer were generated inside channels of microfluidic chips. Exemplary performance tests were performed for the monolithic Hayashi-Jørgensen catalyst in continuous flow, which showed good results for the Michael addition of aldehydes to nitroalkenes in terms of stereoselectivity and catalyst stability with minimal consumption of reagents and solvents.

A community-built calibration system: The case study of quantification of metabolites in grape juice by qNMR spectroscopy.

Nuclear Magnetic Resonance (NMR) is an analytical technique extensively used in almost every chemical laboratory for structural identification. This technique provides statistically equivalent signals in spite of using spectrometer with different hardware features and is successfully used for the traceability and quantification of analytes in food samples. Nevertheless, to date only a few internationally agreed guidelines have been reported on the use of NMR for quantitative analysis. The main goal of the present study is to provide a methodological pipeline to assess the reproducibility of NMR data produced for a given matrix by spectrometers from different manufacturers, with different magnetic field strengths, age and hardware configurations. The results have been analyzed through a sequence of chemometric tests to generate a community-built calibration system which was used to verify the performance of the spectrometers and the reproducibility of the predicted sample concentrations.

Oxidative NHC-Catalysis as Organocatalytic Platform for the Synthesis of Polyester Oligomers by Step-Growth Polymerization.

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (Mn ) in the range of 1.5-7.8 kg mol-1 as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.

Enantioselective Desymmetrization of 1,4-Dihydropyridines by Oxidative NHC Catalysis.

The unprecedented desymmetrization of prochiral dialdehydes catalyzed by N-heterocyclic carbenes under oxidative conditions was applied to the highly enantioselective synthesis of 1,4-dihydropyridines (DHPs) starting from 3,5-dicarbaldehyde substrates. Synthetic elaboration of the resulting 5-formyl-1,4-DHP-3-carboxylates allowed for access to the class of pharmaceutically relevant 1,4-DHP-3,5-dicarboxylates (Hantzsch esters). DFT calculations suggested that the enantioselectivity of the process is determined by the transition state involving the oxidation of the Breslow intermediate by the external quinone oxidant.

Enzymatic synthesis of biobased aliphatic-aromatic oligoesters using 5,5'-bis(hydroxymethyl)furoin as a building block.

5,5'-Dihydroxymethyl furoin (DHMF) is a novel biobased difuranic polyol scaffold, achievable from the benzoin condensation of 5-hydroxymethylfurfural (HMF), which has recently been employed as a monomer for the preparation of cross-linked polyesters and polyurethane. Its upgrading by means of enzymatic reactions has not yet been reported. Here we demonstrated that Candida antarctica lipase B (CALB) is a suitable biocatalyst for the selective esterification of the primary hydroxyl groups of DHMF. Exploiting this enzymatic activity, DHMF has been reacted with the diethyl esters of succinic and sebacic acids obtaining fully biobased linear oligoesters with number-average molecular weight around 1000 g mol-1 and free hydroxyl groups on the polymer backbone. The structures of the DHMF-diacid ethyl ester dimers and of the oligomers were elucidated by NMR and MS analyses.

Native Quercetin as a Chloride Receptor in an Organic Solvent.

The binding properties of quercetin toward chloride anions were investigated by means of ¹H-NMR, 13C-NMR, and electrospray ionization mass spectrometry (ESI-MS) measurements, as well as computational calculations. The results indicate that quercetin behaves primarily as a ditopic receptor with the binding site of the B ring that exhibits stronger chloride affinity compared to the A ring. However, these sites are stronger receptors than those of catechol and resorcinol because of their conjugation with the carbonyl group located on the C ring. The 1:1 and 1:2 complexation of this flavonoid with Cl- was also supported by ESI mass spectrometry.

Aerobic oxidation of 5-hydroxymethylfurfural to 5-hydroxymethyl-2-furancarboxylic acid and its derivatives by heterogeneous NHC-catalysis.

The application of the oxidative system composed of a heterogeneous triazolium pre-catalyst, iron(ii) phthalocyanine and air is described for the selective conversion of 5-hydroxymethylfurfural (HMF) into the added-value 5-hydroxymethyl-2-furancarboxylic acid (HMFCA). The disclosed one-pot two-step procedure involved sequential oxidative esterifications of HMF to afford a polyester oligomer having hydroxyl and carboxyl terminal groups (Mw = 389-1258), which in turn was hydrolyzed by a supported base (Ambersep 900 OH) to yield HMFCA in 87% overall yield. The same strategy was adopted for the effective synthesis of ester and amide derivatives of HMFCA by nucleophilic depolymerization of the oligomeric intermediate with methanol and butylamine, respectively. The utilization of the disclosed oxidative system for the direct conversion of HMF and furfural into their corresponding ester, amide, and thioester derivatives is also reported.

Enantioselective Dearomatization of Alkylpyridiniums by N-Heterocyclic Carbene-Catalyzed Nucleophilic Acylation.

A chiral NHC-catalyzed dearomatizing reaction of activated N-alkylpyridinium salts with aliphatic aldehydes is described. The resulting acylated 1,4-dihydropyridines have been obtained with complete C4 regioselectivity and enantioselectivities in the range 52-78% ee. The (4R)-absolute configuration of the synthesized compounds has been determined by the TD-DFT simulation of the electronic circular dichroism spectra.

Synthesis of functionalized imidazolidine-2-thiones via NHC/base-promoted aza-benzoin/aza-acetalization domino reactions.

A strategy for the synthesis of biologically relevant 5-hydroxy-imidazolidine-2-thione derivatives is presented. A novel class of α-sulfonylamines have been suitably prepared (46-81% yield) as precursors of formal benzylidenethiourea acceptors; these are generated in situ and intercepted by N-heterocyclic carbene (NHC)-activated aldehydes affording open-chain aza-benzoin-type adducts, which in turn undergo an intramolecular aza-acetalization reaction in a one-pot fashion. A thiazolium salt/triethylamine couple proved to be the more effective system to trigger the domino sequence giving the target heterocycles in good yields (45-97%) and diastereoselectivities (up to 99 : 1 dr). The multigram scale synthesis and elaboration of a selected 5-hydroxy-imidazolidine-2-thione compound is also described.